Yes, press menu while holding menu press power then release and press vol up (not down) release all buttons. press vol up to v80 to enter convergence menu Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Mehdi Tafaghodi" <mehdi@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 15, 2005 1:15 PM Subject: [TechAssist] RCA model # P52820BL , Chassis # PTK195DB Convergence off > Hello Techs, > > This RCA tv Model P52820BL and Chassis # PTK195DB convergence shift and > also bowed from top and bottom. I replaced R19717 ( 100 ohm ) which was > open and stk IC U19700. No change. I tried to go to convergence menu by > holding menu press/release power then press vol dn. and release menu and > vol dn. at the same time, but it did not work. Is there any suggestions ? > > Mehdi > Nova Service Center > 7531 Linbergh Drive > Gaithersburg, MD 20879 > 240-632-2994 > mehdi@xxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/