[TechAssist] Re: RCA VCR Model # VR525 Eat Tapes FIX
- From: "DOCVIDEO" <DOCVIDEO@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 23 Nov 2001 20:05:28 -0800
Seems some did not read my post correctly....this was a FIX of the problems not
a
request for help.....
MONTE MONCRIEF
BAKERSFIELD, CA.
DOCVIDEO@xxxxxxxxxx
----- Original Message -----
From: "George Winters" <littletiger67@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 22, 2001 8:19 PM
Subject: [TechAssist] Re: RCA VCR Model # VR525 Eat Tapes FIX
Replaced the idler wheel if still spilling out the tape.
George Winters Jr.
GLW Custom Electronics
Tn.
Ernest Brewley <radiodok@xxxxxxx> wrote:
check the tape tension mac. the felt padding on the tension band sometimes
comes loose and the adhivise stick the band to the supply reel.
>From: "DOCVIDEO"
>Reply-To: techassist@xxxxxxxxxxxxx
>To:
>Subject: [TechAssist] RCA VCR Model # VR525 Eat Tapes FIX
>Date: Wed, 21 Nov 2001 19:40:21 -0800
>
>
>TEC's
> RCA VCR model VR525 came in with two problems....[ another case
>of high
>usage of Rewind ]
>
> 1. "Eat's Tapes " complaint [ tape spillage on eject].
> 2. During play or stop modes if rewind was pushed would eject tape
> with tape spillage. Would Forward ok ..but not in FF..but slow mode.
>
> After checking and cleaning mode , removed capstan motor
>shaft..burnt..cleaned and
>re-lubed [ also checked for excessive bushing wear..ok ]
> Checked S603 Supply End Sensor , along with LED S601 both OK.
> Removed Idler and Drive Gear Assy.... disassembled gear drive
>assy....cleaned felt
>clutch pad AND made cuts across pad ring about 1/8th" apart round whole
>pad....on
>pressure plate [ grooved plate] placed cuts also across grooves same
>spacing .....
>Idler can not be disassembled-assembled..flexed apart pressure plate and
>felt
>inserted cotton swab with cleaner rotated gear...
>Re-installed...Inserted tape...pressed stop...RW....WHAM..went into
>hi-speed RW no
>problem..FF same....
>
>
>
>MONTE MONCRIEF
>BAKERSFIELD, CA.
>DOCVIDEO@xxxxxxxxxx
>
>=================================
>Help make your TechAssist database better!
>Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
>=================================
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
---------------------------------
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
