Contaminated control buttons? Inspect for corrosion or remove all of them and check for leakage......should measure infinite....any resistance will throw off the scheme of operation. ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ----- Original Message ----- From: "Ernie - Valley TV & Stereo" <valleytv@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 16, 2004 2:05 PM Subject: [TechAssist] RCA TV model F32632SB chassis CTC187CN3 > Hello All: > > Having an intermittent problem with this set. > Sometimes set won't switch on, then after a while set will come on > by itself. I have done all the usual resoldering etc. > This is the third time I have the set in the shop. A month ago I replaced > H O transistor and set worked fine for about a month. A couple of days ago > set would not switch on in the morning and I replaced eeprom. Set again > worked fine for two days and this AM : same problem. > When I went to put set on the bench set had turned on by itself about an hour > after I tried to switch it on. Now set works fine again. > Has anyone run across this problem ? Any help would be appreciated. > TIA > > Ernie Niessen > Valley TV & Stereo > 9401 Fletcher St. > Chilliwack, B.C. > V2P 4Z4 > Since 1960 > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/