With my sencore scope it is 77 volts DC. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 22, 2004 3:06 PM Subject: [TechAssist] Re: RCA T09081BC Chassis KVC13B Bright w/retrace > Check your 200V line to the CRT board. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > ----- Original Message ----- > From: "Shaun" <satguy@xxxxxxxxxxxxx> > To: "tech" <techassist@xxxxxxxxxxxxx> > Sent: Monday, March 22, 2004 2:58 PM > Subject: [TechAssist] RCA T09081BC Chassis KVC13B Bright w/retrace > > > > This set works ok but has a bright screen with retrace lines and I have no > > schematic to follow the problem. Does anyone have any notes on this set? > > > > Shaun > > > > Advanced Electronics > > 224 West Riverview Ave. > > Fort Morgan, CO 80701 > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/