Replace C1901 and C1902 labeled C901 and C902 on audio board, 1 mfd 50 volt electrolytic Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Corey Brazell" <cohbraz@xxxxxxxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Friday, April 30, 2004 7:37 AM Subject: [TechAssist] RCA / Proscan PS35652 CTC169BJ2 Buzz in Audio > Good morning. > > This set has a buzz in the audio from both speakers when the set is turned > on. It will buzz on all inputs. The volume control and mute has no effect > on the buzz, it stays at a constant level. If the volume is turned up, the > regular audio will override the buzz, and the audio sounds normal. The > balance control has no effect on the buzzing, but turning the speakers off > in the menu will stop the buzz and audio. I am not real familiar with the > audio circuit in this set, so any help pointing me toward what direction I > need to go in would be a great help. > > Thanks, > Corey Brazell > Audio Video Electronics > 12169 SC Hwy 121 > Newberry SC 29108 > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/