What controls the OSD is vertical and horizontal pulses from the deflection stages and an LC network off the micro which is used to generate the OSD. I'm at home now, and don't have access to data, but I'm thinking either there is a problem with the horizontal pulse sample or the LC network. If you don't get an answer before, I'll look this up tomorrow and let you know in the evening what specifics I find. Jerry Eiting geiting@xxxxxxxxxx Christians Electronic Service Piqua, Ohio ----- Original Message ----- From: "drcvr" <drvcr@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 25, 2002 9:40 AM Subject: [TechAssist] RCA PROJECTION TV CHASSIS PTK169PCA MODEL P46729BA | Hi, Techs! | This TV has good size main pix, but ON SCREEN DISPLAY is way too large. Can't read and tell which channel is on, display show C and hafl of H (CH) on the right corner. Voltage on pin 16, 17, 18 of U3101 (control micro IC) are normal, voltage on pin 19 of U1001 is 4.9V (normal). What am I missing? or where can I start with? EEPROM?. TIA! | Don B. | Dr. VCR est:1994 | 20 Hanson Ave | Kitchener, Ontario | CANADA N2C 2E2 | Tel 519-579-7112 Fax 519-579-1996 | drvcr@xxxxxxxxxx | | | ------------------------------------------ | To REMOVE your email address, click here: | http://www.tech-assist.org/unsubb.html | To CHANGE your email address, click here: | http://www.techassist.net/forms/change.html | ------------------------------------------ | ***NEW*** Tips Added Instantly!!!*** | Submit Repair Tips here: | http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/