Cracked traces on the left front side of the board. Got to look real careful. They crack when you try to slide the board in and out. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "joel e sanford" <jo-rope@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 02, 2003 1:56 PM Subject: [TechAssist] RCA P46738AT ctc169pg > > joel sanford > dba/speedy electronics > ph/fax 773 264 2173 > chicago ills > received this set with a deadset condition, blown Q4401, deceided to send > for the infamous 169 repair kit from tritronics ! In stalled same ,and > when I turned set on(just pulled the light box)OSD, and nothing else no > sound(ran external spks)and when I turned up the G2,s had retrace > lines(circularor curved and slanted),so I chaNGED THE q2906 > TRANSISTOR,checked the scan (J\p6106 pin 2 for activity No volts! went to > the crt board and read voltages at test points 1-2-3 and read 209v on TP1 > 11.95v TP2 219vTP3 went to aux pwr board and the Plus and minus 15volts > read OK the plus and minus 45 read 50V....Now is there some extra Tip to > try so I can get this set up ? eny and all sugestions will Be Appreciated > .. Joel Sanford > > ________________________________________________________________ > The best thing to hit the Internet in years - Juno SpeedBand! > Surf the Web up to FIVE TIMES FASTER! > Only $14.95/ month - visit www.juno.com to sign up today! > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/