Hi Damon: Thank You for the Info. I will them out Hoa Tran Damon wrote: > OK, first NO RELAYs..... > 2nd: Standby B+ is 143 volts at CR 4116, located on right side of HI > Voltage transformer and lower left catty corner of SMPS transformer. Also if > 143v is not 143-146, adjust orange potentiometer R4113 (by SMPS ic) to 143V. > Otherwise, replace C4102--(22uf/100wv) and C4104 (15uf/50wv? Voltage not > marked on schematics). If you have 143V then measure CR4118, 15 volts is > preferred on this, 14 ok, but replace if the voltage is at or below 12 > volts. > Thus ends your Standby circuit, or the parts that fail quite often in that. > Also connected is CR4117 (7v source) CR 4120 (-17v for Audio) CR4119 (+17V > for Audio).\ > > Next: During power on your 143 may kick up to 145 max, that's within specs. > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > ----- Original Message ----- > From: "htran" <htran@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, December 07, 2001 2:40 PM > Subject: [TechAssist] Re: RCA P46130WK > > > > > I am sorry my name is Hoa Tran. LED indicator does not turn on and no > relay > > clicking, as I tried to turn it on with the front panel or remote. I > could > > not find any mechanical relay on the PC board (could be using solid-state > > relay). I do not know where to check the standby voltage maybe a > schematic > > will help. > > Thank you for any information. > > Hoa Tran > > > > Jeff Dougherty wrote: > > > > > Please sign your name, so we know who you are. > > > Also, we need more information... > > > Do you get relay click? standby voltage there, etc. > > > Give us a little more to go on. > > > > > > Jeff > > > mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com > > > FAX 1-413-280-0677 > > > Intrepid Video & Electronics > > > Harrisburg, PA 17111 > > > 717-909-8844 > > > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > ----- Original Message ----- > > > From: "htran" <htran@xxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Thursday, December 06, 2001 4:41 PM > > > Subject: [TechAssist] RCA P46130WK > > > > > > > > > > > Hi group > > > > I got this RCA TV Model#P46130WK Chassis#PTK169PXA the set will not > > > > turn on with remote or front panel. I checked the power supply section > > > > and there was a couple low caps but this does not fix the problem the > > > > horizontal output transistor seem to checked out ok. > > > > Any information or a schematic of this model will be appreciated. > > > > > > > > Thank You. > > > > > > > > ================================= > > > > Help make your TechAssist database better! > > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > > ================================= > > > > To UNSUBSCRIBE your email address, click here: > > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > > > > > > > > > ================================= > > > Help make your TechAssist database better! > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > ================================= > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe