Hello, I am working on a RCA Model P46922 / Chassis PTK195M2A. The set came in dead. I found a shorted H-out (Q14401), and replaced it. The set powered up, but with CRT's at full on with overscan. (We just have the chassis, no cabinet.) Found resistor R19100 melted, and the connector P19106 with burn marks. Replaced the resistor and cleaned up the connector with no results. Soon as it's powered up, that resistor starts smoking. Then proceeded to replace blackened resistor R14701. Found (R15191) on all three CRT boards blackened, replaced them, and found R12916 black too. Pin 25 of U16201 read 6 Ohms to ground, new one does not. Replaced the IC and the coupling cap (C12904). Now when powered up, does the same thing as before. Am I just missing something? Or is it time to bail. Any help would be great. Thanx, Scott Beebe Ohm Electronics Inc. 609 W. Clinton St. Ithaca NY 14850 Voice: (607) 273-8406 Fax: (607) 273-8743 WWW.OhmElectronicsInc.com mailto:Scott@xxxxxxxxxxxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/