[TechAssist] Re: RCA ITC222 and chipper check
- From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 10 Mar 2004 23:02:50 -0600
Walter
I have used CC for some years and it works fine for me. However I have not
used it on the ATC311. It uses a crossover cable for the ethernet port. I do
remember all of the post on that one and it was a topic of discussion when I
went to the Thomson ASC school back on Oct. They insisted it worked and he
said he did several himself before leaving for our meeting. I myself have
not had the opportunity to do it so I don't know any of the potential
problems one would run into on that chassis.
My problem has scattered info on it on there website and CC users manual.
They don't seem to update it often enough or carefully enough for a tech to
use the software proficiently.
I just figure since so many people was having trouble with this chassis
someone had to get a straight answer from Thomson about on how to align it
with CC before I spend a whole day on the phone with them. The call I made
today they wouldn't even let me stay on hold....due to the volume of calls
they said call back later.
Jason
Moutons Electronics
----- Original Message -----
From: "walter wood" <wwood_38478@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, March 10, 2004 10:21 PM
Subject: [TechAssist] Re: RCA ITC222 and chipper check
> Jason;
> yours is the second request on this matter I've
> seen lately.
> I don't have an answer.
> I fought with Sencore and Thomson for 18 months on
> the ATC311 chassis.
> The e-mails are all in the archives i'm sure.
> Truth is, I've never gotten Chipper Check to work
> with anything!!!
> I've done all the up dates, and run all the
> diagnostics, and accordingly, it's working up to
> specs.
> But, It doesn't work.
> Biggest waste of time and money I've ever seen.
> Just a thought, maybe it's speaking Chinese.
> Walter
> --- Mouton's Electronics <moutons@xxxxxxxxxxxxxxxx>
> wrote:
> > Ok, Where is the big "mystery connection".
> > Chipper check say to use the MM101 TECI1
> > connector that I had to order from Sencore but
> > since the CC doesn' t have complete setup
> > instructions to connect CC to the ITC222 I have
> > no idea where to connect it to the chassis. I
> > have read others say they have changed the SSB
> > board, so if you changed one I would hope you
> > used CC to download and reinstall the values to
> > the new module. Or has everyone realigned this
> > chassis manually, I hope not, that would be
> > painful;)
> > So, I would like to know if anyone knows where
> > the connection is or has everyone been doing it
> > manually? I will have to change the SSB board on
> > one I am looking at now.
> >
> > Thanks in advance
> >
> > Jason
> > Mouton's Electronics
> >
> >
> >
> >
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login
> > Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
> =====
> Walter Wood
> Future Tech Home Center
> 2786 Hwy. 43 N.
> Lawrenceburg Tn. 38464
> 931-829-3337
> Fax 931-829-4044
> mailto:wwood_38478@xxxxxxxxx
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Search - Find what you're looking for faster
> http://search.yahoo.com
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
