I'll bet you could wire in a remote IR receiver easily enough, just three wires needed, B+, ground and IR out. I sure wouldn't pull the tube! ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana Dave Huston wrote: > I pulled the chassis on this monster set but didn't pull the > pushbutton/remote receive board thinking I would have one that would work > with it here in the shop. I don't. > My question... Is there a simple way to remove the pushbutton board from the > set? It looks like I will need to pull the picture tube to get to it. > There's not enough room to unseat the board because of the heavy plastic > framework behind it. > Have any of you ran into this? > > Dave Huston > Huston TV & Electronics > 2846 Marion-Cardington Rd.E. > Marion,Oh 43302-8919 > Phone/Fax: 740-389-5726 > email: HustonTV@xxxxxxxxxxxxxx > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/