Yes the 5 volts B+ is missing finally I traced it to the jumper to pin one of the front panel switch assy. thanks for the help. Shaun Advanced Electronics Fort Morgan, CO 80701 satguy@xxxxxxxxxxxxx ----- Original Message ----- From: "peggs" <peggs@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx>; "tech" <techassist@xxxxxxxxxxxxx> Sent: Monday, April 19, 2004 9:38 PM Subject: [TechAssist] Re: RCA FR32649YX59 (CTC203CA9) Eratic with no remote action. > Front Keyboard/switches. > Are you saying the 5v B+ to the Remote Sensor is not there ??? > > Peggs > > At 02:04 PM 4/19/04, Shaun wrote: > >This set will change channels by itself and will not work with the remote at > >all. I have less than one volt on the ir sensor but have already replaced it > >and there was no change any ideas. > > > >Shaun > > > >Advanced Electronics > >224 West Riverview Ave. > >Fort Morgan, CO 80701 > > > > > >--------------------------------------------------------------------------- -- > >Lost Password: > >http://www.tech-assist.org and select "Login Problems?". > >Email Archives: > >//www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/