STK730-080 is for use in 220AC input supplies. Bill Bill's TV Service Sulphur Springs, TX >From: "Jon Garver" <jongar@xxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Re: RCA CTC187 STK730-0xx >Date: Fri, 29 Nov 2002 01:05:11 -0500 > >210 watts is the rating. > >Jon Garver >Heritage Television Service >Monticello, Indiana >574-583-9681 >jongar@xxxxxxxxxxxxx or >HeritageTV@xxxxxxxxxxx > >----- Original Message ----- >From: "Jeff Dougherty" <support@xxxxxxxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Thursday, November 28, 2002 9:43 PM >Subject: [TechAssist] Re: RCA CTC187 STK730-0xx > > > > > > Joe, > > > > What's the model number and suffix on the chassis? You should be > including all > > this information. > > I never heard of the STK730-080 and can't find the rating for it. > > Did you mean STK730-030? > > What was the original REG? > > Jeff > > > > FAX 717-564-4952 > > Jeff Dougherty > > Intrepid Video & Electronics Be careful of your thoughts. > > 501 Luther Rd They may become your words > > Harrisburg, PA 17111 any moment. > > 717-909-8844 > > VCR tips, electronics info & general interest. > > www.intrepid-video.com www.tech-repair.net > > www.thetoolcaddy.com www.9-11-2001tragedy.com > > *********************************************************************** > > > > ----- Original Message ----- > > From: "Joe Batchelor" <jbc@xxxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, November 28, 2002 2:08 PM > > Subject: [TechAssist] RCA CTC187 STK730-0xx > > > > > > > > I have a CTC187 that I replaced the chopper IC with an STK730-080 > > about a month ago. It came back with the STK shorted. > > I assumed the 080 would be a better replacement, but this time > > I put my thermometer on it and it is running too hot. My meter > > over ranges at 150F so I do not know exactly how hot it was. > > The set runs normally, B+ is 140.6 > > I added a CPU fan to test and the set has been running for several > > hours. > > > > Perhaps I just have a bad batch of STK's. I have been running into > > several replacement horizontal outputs that run too hot. > > > > Has anyone used the STK730-080 without problems? > > > > Joe Batchelor CET TX-80 > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/