You need a chipper checker to enter in the old tuning paremeters. Jeff Lyles TV and Appliance Elkhorn, Wi. 53121 tech@xxxxxxxxxxx ----- Original Message ----- From: <ElectronicRepair@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 17, 2003 2:53 PM Subject: [TechAssist] RCA CTC177BH2 > I have this TV which came in dead, replaced the EEPROM and that turn the TV > set on, but now I can not auto program this TV, it stays always on channel > 3 but I can onter the numeric channels from the remote control and it will > go to that channel. > Can anyone shed some light on this problem. > Thanks in advance. > > Thank you, Mark > Electronic Repair Services > 48 W. James St. > Lancaster, PA 17603 > Phone 717-393-5115 > FAX 717-393-5115 > > **************************************************************************** * > Submit A Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > **************************************************************************** * > For automatic password retrieval 24 hours a day, go to: > http://www.tech-assist.org and select "Lost your Login Info?". > **************************************************************************** * ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************