i've been using an ecg 288 for years to replace these video buffers when bad. I've found that this a stronger device and will not short out when you get an intermitt short in the crt like the ecg 159. Give it a try, i think you'll find it keeps the repeats down. Jim Myers wrote: > Q2906 is p/n 143806 or NTE159, however it is a Luma buffer in the CTC169 > chassis rather than a 5v supply, best double check the ref number. > > Jim Myers > jr.myers@xxxxxxxxxxx > ----- Original Message ----- > From: "Mike Barnett" <passthecash@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, October 18, 2001 12:45 PM > Subject: [TechAssist] RCA CTC169JS6 part cross needed > > > > > Hi guys, does anyone have a cross for trasistor Q2906/ 5v supply to > icu1001 > > pin 16 on main board. number in device is 3474.any help is apprieciated. > > > > > > Get It Fixed At > > Rochester Electronics > > 630 West Ridge Rd. > > Rochester, NY 14615 > > 716.663.6870 > > www.RochesterElectronicsRepair.com > > > > > > > > > > > > _______________________________________________________ > > Send a cool gift with your E-Card > > http://www.bluemountain.com/giftcenter/ > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.