[TechAssist] Re: RCA CTC157 chassis,video and audio mute intermittent
- From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 2 Nov 2001 10:25:44 -0500
That's a good fix Joey, but only for the CTC140 chassis, I've done a bunch
of those and own one myself. Thanks anyway.
Jim Myers
jr.myers@xxxxxxxxxxx
----- Original Message -----
From: "Joey Baker" <docwade2@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 01, 2001 8:32 PM
Subject: [TechAssist] Re: RCA CTC157 chassis,video and audio mute
intermittent
>
> look for a small stand up or daughter board on the right side of the
chassis
> close to the flyback I believe . Remove this board from the chassis and
> re-solder all the diodes . Re-install the board and as I like to say
Collect
> the Money . I am pretty sure this is the chassis .... Hope I have helped
...
> ----- Original Message -----
> From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Cc: <tv-repair@xxxxxxxxxxxxxxx>
> Sent: Thursday, November 01, 2001 3:34 PM
> Subject: [TechAssist] RCA CTC157 chassis,video and audio mute intermittent
>
>
> > RCA CTC157 chassis,video and audio mute intermittent
> >
> > Replaced Q2901 but no change, problem starts after about a ten minute
warm
> up, then it is just on and off at random. HV, filaments, vertical, etc all
> ok as well as OSD, just goes to a blank screen and no sound.
> >
> > Has anyone seen this? Thanks.
> >
> > Jim Myers
> > jr.myers@xxxxxxxxxxx
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
