[TechAssist] Re: RCA CTC120, GJR699, need speaker.

  • From: Kevin <kevintv@xxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Thu, 23 Dec 2004 19:00:41 -0800

Thanks, that is good to know.  I am going to try 2-16 ohm speakers in
series, one in the front and one facing the rear.  Hopefully this will
give my older customer enough volume.  She doesn't like her hearing aids
and she won't wear wireless headphones.  

Kevin Wilks
Kevin's TV & Video Repair
Penticton BC Canada
kevintv@xxxxxxx 
 

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Jon Garver
Sent: Thursday, December 23, 2004 5:03 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: RCA CTC120, GJR699, need speaker.

Kevin, Gary is right. The speaker is 32 ohms.

Jon Garver 
Heritage Television Service 
204 Heritage Rd.
Monticello, Indiana U.S.A.
47960-1510          
574-583-9681  Voice & FAX   
jongar@xxxxxxxxxxxxx 

----- Original Message ----- 
From: "Kevin" <kevintv@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, December 23, 2004 1:15 AM
Subject: [TechAssist] Re: RCA CTC120, GJR699, need speaker.


> I don't know.  The set is 12 miles away and I did not measure the
> dimensions.  It is out of a console TV, so almost any size would
> probably fit.  I was more interested what the impedance was so I could
> go through my own junk pile and find one.  Thanks.  
> 
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx 
>  
> 
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Gary McCartney
> Sent: Wednesday, December 22, 2004 9:51 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: RCA CTC120, GJR699, need speaker.
> 
> Kevin, most RCA sets used 32 Ohm speakers. What are the dimensions of 
> it? I probably have some.
> 
> 
> 
> 
> Gary McCartney
> 
> McCartney Electronics
> Guelph Ontario Canada
> Est. 1984
> email: gary (at) number63.ca
> 
> 
> 
> 
> 
> 
> 
> Kevin wrote:
> > The customer's son-in-law replaced the original speaker with a 9.5
ohm
> > speaker.  Does anyone know if this is the correct impedance?  The
new
> > replacement speaker is shot.  Thanks.  
> > 
> > Kevin Wilks
> > Kevin's TV & Video Repair
> > Penticton BC Canada
> > kevintv@xxxxxxx 
> >  
> > 
> > 
> > 
> >
>
------------------------------------------------------------------------
> -----
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> > 
> 
> 
>
------------------------------------------------------------------------
> -----
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
> 
> 
>
------------------------------------------------------------------------
-----
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
> 

------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 12-2004