Hi, Check Q906 luminance buffer. Usually shorted, very common in the ctc156/7 and ctc168/9. It sometimes will not short to all 3 legs so check them all. Jason Mouton Mouton's Electronics 1116 Center St. New Iberia, LA 70560 337-364-1641 Phone/Fax moutons@xxxxxxxxxxxxxxxx ----- Original Message ----- From: "Phil Bader" <philbad@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 11, 2002 12:45 PM Subject: [TechAssist] RCA 31" F31700GG, CTC169JS6 G2 screen@ min, still retrace lines > > This was given to us. Turned it on and had a good picture except was > too bright and retrace lines. Turned the G2 screen pot down until at > minimum. Picture looks good until the scene fades out and can notice the > retrace lines and basckground illumination indicating still g2 too > high.Any issues on these 169's on this? I think it has a small seperate > focus/screen assy clipped to back of flyback. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: philbad@xxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/