Mike Look at cap c4401 If it is bulging out on the sides replace it its a 200149 cap also replace the diode cr4401 (164589) and just for good measure replace 200148 it is the pincushion transistor Good luck Tom mhuppert4 wrote: > Has anyone else worked on pincushion/width problems on a Proscan PS3112? I' > ve changed everything in the circuit, yet neither the width or e/w pots do > anything to the picture. All signals are good except the waveform going into > u4801 pin 3. Any clues would be great! > > Mike > Mike's Electronics > mhuppert4@xxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. -- Thomas S. Woodward A+,NET+, Crestron Master tech # 01965, Tri-Valley Repair 32 Goshen Way Middleboro Ma. 02346 (508) 947-8119 (508) 359-7176 (617) 719-3958 (cell) mailto:thomas.woodward@xxxxxxxxxxx http://www.tri-ValleyRepair.cityslide.com/ ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.