Don't care for email? Use the member forum: http://www.tech-assist.org/secure/tip/mb/view.pl ---------------------------------------------------------------------------- Sorry failed to list chassis #. --------------------------------------------------------------------------------- Have the above ptv of proscan that the picture slightly compresses horizontal and vertical after a few minute warm up. the collector voltage on the horiz. output xstr is stable at 135.6 volts. 5 volts stable while the picture is changing. all the run voltage have been checked. Have monitored the drive to horiz. output xstr. is stable. The picture is just so slightly compresses (bounces) at top/bottom and on sides after a 5 to 10 minute warm up. All else as for color,convergence,sound and video fine. Has anyone experienced such and would share it with us? Have discussed with Tech line at Thomson with thus far no avail. Thanks, -- -- Walt Audio Video Service of Granville, Inc. 2106 Sunset Road Oxford, North Carolina 27565.8202 http://www.audiovideoservice.com ------------------------------------------ Submit A Repair Tip Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ To CHANGE your email address, click here: http://www.techassist.net/forms/change.html