Don't care for email? Use the member forum: http://www.tech-assist.org/secure/tip/mb/view.pl ---------------------------------------------------------------------------- Walt, you might get more responses if you include the chassis number. Did you measure the high voltage? Perhaps the flyback is not putting out a stable voltage to the anode. Gary McCartney McCartney Electronics 7134 Fife Rd, RR 7 Guelph Ontario Canada N1H 6J4 Fax: (519)821-1530 email: gary (at) number63.ca Walt wrote: > > Don't care for email? Use the member forum: > http://www.tech-assist.org/secure/tip/mb/view.pl > ---------------------------------------------------------------------------- > > Have the above ptv of proscan that the picture slightly compresses > horizontal and vertical after a few minute warm up. the collector > voltage on the horiz. output xstr is stable at 135.6 volts. 5 volts > stable while the picture is changing. all the run voltage have been > checked. Have monitored the drive to horiz. output xstr. is stable. > The picture is just so slightly compresses (bounces) at top/bottom and > on sides after a 5 to 10 minute warm up. All else as for > color,convergence,sound and video fine. Has anyone experienced such and > would share it with us? Have discussed with Tech line at Thomson with > thus far no avail. > Thanks, > -- > Walt > Audio Video Service of Granville, Inc. > 2106 Sunset Road > Oxford, North Carolina 27565.8202 > http://www.audiovideoservice.com > > ------------------------------------------ > Submit A Repair Tip Here: http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html -- ------------------------------------------ Submit A Repair Tip Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ To CHANGE your email address, click here: http://www.techassist.net/forms/change.html