Check -12v Supply Off Pin 7 Of Flyback. If It Measures +4vdc Or Something Odd, Check For Open winding on Pin 7 On Flyback Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ----- Original Message ----- From: <Hermantvr@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 08, 2002 3:00 PM Subject: [TechAssist] Pro Scan PS35123 CTC169EJ5 Vertical? > This unit came in with reduced vertical height, NO picture NO audio. Has > OSD. Vertical height only about 8 inches with completely black raster. Can > run screen control up and have raster. Can hear buzz in audio when OSD is > up. Voltages in power supply and horizontal are close. The voltage on SCR501 > are: A= 6.8vdc G=0.2 C=0 however the voltage on pin 1 of U4501 is 6.1 > Replaced CR4504 and C4520. I have worked on the CTC169 many times however > this one is costing me time. Any help will be appreciated. > Tommy Herman > Herman TV > 250 School Ave SW > Taylorsville NC 28681 > 828-663-5322 voice > 828-632-3880 fax > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/