This is a small Philips TV for mounting from a hospital arm. It has been modified by a company called PDI and they have plastered their own sticker and model number over the original Philips model number. The set comes on fine (in cable mode) when first turned on after power up. Next time you turn it on, it looses it's cable mode. Unpowering and repowering brings it back into cable mode where it belongs. It seems to be a Funai chassis - I wonder if anyone knows why the memory is lost this way, or could cross it to an obtainable manual with the following information taken off several stickers on the chassis: L9900UA and E175216 on the board. L9900UZ and 753750 another sticker on the board. 990002598 and "partial digits" J51?1801 on a sticker, front of board BSC25-2097S on flyback. Thanks a million, Art Art Bevilacqua Essex Radio and TV 40 Main Street Essex, MA 01929 abevilac@xxxxxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/