This is a philips CTV set with MD1.1 chassis (which is a lot like MD1.2, MD2.1 and the like), struck by lightning. It was switched off at the time. I get a green light, Horizontal and Vertical signals are present but screen stays black. I get a DC voltage on the R, G and B taps of the CRT. I put the tuner PCB (with IF, PAL decoder etc) in a good TV and it worked fine, so that's not the cause. I notice that the "+8V" and "+13V" are 11V and 15V respectively. I have no schematic or other voltage indications I can refer to. Any help? TIA Stefaan Van Slycken Van Slycken Elektro - Waasmunster, Belgium. P.S. This is not the same set I posted about earlier. ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/