I don't have a print on that chassis but check your relay drive circuitry. Most have a transistor that turns the relay on and the transistor is activated by the micro. --- Jon Garver Heritage Television Service 204 Heritage Rd. Monticello, IN. 47960-1510 574-583-9681 Alternate Email: HeritageTV@xxxxxxxxxxx ----- Original Message ----- From: "mark brock" <brock@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 15, 2002 6:01 PM Subject: [TechAssist] Philips 25X601 chassis > > came in dead, changed filter cap and regulator, now high voltage comes on > and a dim picture as soon as you plug it in, hit the power button and > sound comes up and picture is perfect, hit power again sound goes off and > picture goes dim but still visible, something not clicking the relay, > relay is OK, what did I miss? > brock > Brock Electronics > R.R.4 box 237 > Independence Ks. 67301 > 620-331-0235 > fax 331-7191 > > brock@xxxxxxx > mailto:brock@xxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/