Thanks for the suggestion but it does not respond to flexing/hitting the board. Not a solder joint. Bob In a message dated 3/15/2005 8:01:54 PM Eastern Standard Time, satguy@xxxxxxxxxxxxx writes: If it's a Panasonic always check the relay for ring cracks in the solder, although I do not know for sure if your set has a relay switch or not. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: <BOSS1996@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 15, 2005 4:17 PM Subject: [TechAssist] Panasonic Proj, PT-51HX41E, ch. AP820, intermittent shutdown > Customer states it happens after about 1 hours of use, once shutdown the set > has to be unplugged to reset it. > I have had it running for 4 days straight and finally saw it happen today. > Reset it and it has run all day. > Anyone have any tips on this one? > Thanks in advance, > > > > Robert Cardoza > Picture Perfect Elec. > 9940 NW 6th Ct > Pembroke Pines, Fla, 33024 > 954-435-5868 > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/