Let me try this again. I don't seem to get much responses on questions ask late on Fridays. > The 5vcc on pin 8 of the eeprom is there but > there > is no voltage on pins 5 and 6, the scan and data > lines. > Shouldn't there be about 4.7vdc there?? > I'm open for suggestions, as I have resoldered > the > relay, and everything else that looked the least > bit flakey. > Set was intermittent, but I haven't got it to > come > on at all lately. > Thanks > Walter ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________________________ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/