If this unit is using the same type of power supply as the regular VCR's I'd suggest that you change the filters in the power supply and in all likelihood that would have repaired it. Peter Kowalik pe.kow@xxxxxxxxxxxx Keith's Stereo Burl On -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Don Hartigan Sent: April 23, 2004 5:59 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Panasonic AG6124 Time/Laspe Loading The above unit will not complete it's ''tape'' load.It will ''cassette load'' but will go to approx 3/4 ''tape'' load.The load gear mech assy looks ok & the toothed load belt is new.Cleaned the mode sw. & relubed the gear/mech assy,ie,removed all the old black grease.If I use an external power source I can get the unit to ''tape load'' but power supply labors to do this.What is the location #of IC used in loading &what voltage should I see at the loading motor terminals.All inputs welcome....TIA..... Don of HARTS-TVCR''ASC'' 9 Robert St,Oromocto,NB,Can,E2V3N2 hartstv@xxxxxxxxxxx Tel-5063579785,fax-3576010 cel-4701719 ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.659 / Virus Database: 423 - Release Date: 15/04/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.659 / Virus Database: 423 - Release Date: 15/04/2004 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/