Some of the astute may remember I had a problem with a 36" Panasonic about 2 months ago with erratic function of the Tact switches.If you pushed any of the switches, , the Menu would always come up. Finally got a Micro for it, yesterday. Now the Micro cured my problems of the erratic function of the TAC switches. But when I turn it on, the relay will click, but nothing else. I started to take some voltages around the Regulator, and I notice when I just put a probe on pin 2 and 3 of the Regulator, the set will start up, and everything works fine. If I turn it of and try to turn it back on, same problem. No start up. I just have to put one side of my meter probe on the regulator pins, and on it comes. Any ideas...since I would sure love to get this sucker out of my shop. The Upc had been backordered from Panasonic for 7 weeks. TIA. -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/