The most common thing I have found on Panasonic with that symptom is loose connection or poor solder on the degaussing block. I can't remember the location number but it is the 3 leg black box in the degaussing circuit it can also be bad, also look the entire board over for loose connections. Shaun Advanced Electronics Fort Morgan, CO 80701 satguy@xxxxxxxxxxxxx ----- Original Message ----- From: "R&S ELECTRONICS" <rselect@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 29, 2005 9:07 PM Subject: [TechAssist] PANASONIC CT-36SX12F CHASSIS AP382 > TV plays for a while (30min to an hour) than goes off (its dead set) the only way to start is to un[lug the set and plug it back in TV comes on fine. The cycle keeps on going . > Pls let me know if anyone has seen this problem or what to look for? > Anybody has a schematic for it. > Thanks > R&S Electronics,PA > TEL:(717)532-6312 > Email:rselect@xxxxxxxxxxxx > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/