Hi dont know if this will help but try holding the power button in the on position for a few seconds to see if it comes on Eric Bill Midgett wrote: > > Hello Guys > This unit came in dead (got it to power up) then had pulsating picture. > Replaced more caps. > The only thing wrong now (besides loosing money on this job) is you have to > push power button > twice when unit has been off for a short time. Replace most caps on 12v line. > Any ideas what I am missing? Thanks in advance. > Bill > > Bill's Appliance & Electronic Repair > Oblong IL > > bmidgett@xxxxxxxxx > yourtvman@xxxxxxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.