This series of sets does NOT have lots of bad caps like much earlier Mitsubishis. I also does not use the LA7838. Just check the regulators and the related filter caps and/or trace the problem in the signal path. Leonard Caillouet Electronics World 1261 NW 76 Blvd Gainesville, FL 32606 352-332-5608 FAX 352-332-5668 ----- Original Message ----- From: "Jorge Camboni" <geo@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 01, 2004 3:46 AM Subject: [TechAssist] Re: Needprint--Mits. VS45605 > You Must check ALL the caps B4, you're likely to find at least several dozens > of bad caps, from the power supply to the convergence board. That jitter > may be caused by one or more bad caps in the video/sync path; most probably > not related to the LA7838 circuitry. > > good luck Jorge > > At 12:58 p.m. 30/09/2004 -0600, you wrote: > >Need print (PDF) whatever, VS45605 PTV, VZ7 family. Have vertical > >jitter in pix., caps check ok in vertical, put in new vert > >chip. Checked ESR on C2p05 > >cap as per WinStips. > >TIA > >Hugh Thornley > >maintv2004@xxxxxxxxxxx > >Main TV > >636 Main St > >Longmont, Co 80501 > >303-776-6955 Tel > >303-776-0792 Fax > > > >--------------------------------------------------------------------------- -- > >Lost Password: > >http://www.tech-assist.org and select "Login Problems?". > >Email Archives: > >//www.freelists.org/archives/techassist/ > > > > Jorge Camboni, GY Electronics, Richardson, TX > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/