[TechAssist] Re: Need Some input on becoming a RCA ASC.
- From: "Tel-Tek" <teltek3@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 22 May 2004 20:39:33 -0400
Jerry..
Good advice..if it was RCA....Thomson Consumer Electronics went deeper.
Here we had Service Seminars back in the 80's, ASC's) on a No Charge Basis,
with a great Dinner. Then it went to Bring your own lunch, this is the
Equipment you need, we have it, and if you want to remain a ASC, buy
it...(today with a 10% discount).
Some of us tried to discuss recent chassis, and fixes. What we got...
That's old Technology!
We had two guys, Doug Steadman and Mel Hart, these guys were hung out to the
wind because they were too Technically minded, and actually cared about the
Techs.
Some guys from Ontario may remember these guys. Great team.
Mel was the Company...Doug was the Technician.
Just flashing back on those two guys, that's what this trade used to be.
"PRIDE".
-Ed-
Tel-Tek Electronics
Ontario-Canada
teltek3@xxxxxxxxxxxx
----- Original Message -----
From: "Jerome Silverman" <greentron@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, May 18, 2004 9:18 PM
Subject: [TechAssist] Re: Need Some input on becoming a RCA ASC.
> Those are also the Chipper Check people that you see so many good comments
> about. But now that they have less control over product design, the new
> stuff may not require it. But you still might have to get one to work on
> their old stuff. When we were an ASC for them, they used to ask us to do
all
> sorts of special warranty work for them and then they would reject the
> claims. If we persisted, they usually would pay, but not always. One day,
> the rejected claim straw broke the camels back and we told them to learn
how
> to fix the stuff themselves. They were expensive to be an ASC for,
charging
> us for literature for each category, training materials, and the
> Fixfinder data base. They loaned us a few seldom-used jigs but on many
they
> said they didnt have any to loan and we had to buy them. Finally resorted
to
> buying some from distributors and returning them and paying the restocking
> charge.
> Jerry Silverman
> Greentron Inc
> 4 Newland Ave Greenville SC 29609
> 864 232 3889 Fax 271 2080
> greentron@xxxxxxx
> ----- Original Message -----
> From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, May 18, 2004 7:38 PM
> Subject: [TechAssist] Re: Need Some input on becoming a RCA ASC.
>
>
> > Yea, when the boards are available...
> > Mando...RCA's pay rate is better than some of the others and you can
> submit claims online.
> > Jeff
> > --
> > Intrepid Video TV/VCR Repair
> > 263 S Front St, Steelton PA 17113
> > 717-939-7708; (F) 717-564-4952
> > www.intrepid-video.com www.tech-repair.net
> > ----- Original Message -----
> > From: "tvservice" <tvservice@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, May 18, 2004 3:53 PM
> > Subject: [TechAssist] Re: Need Some input on becoming a RCA ASC.
> >
> >
> > If you want to stay in this business I recommend becoming ASC for as
many
> > manufacturers as you can
> > Most RCA sets are pretty easy repairs unless you get into the new HD
> chassis
> > but most HD sets are board replacement in warranty
> > Robert
> > tvservice@xxxxxxxxxxxxx
> > H & H Electronics Inc
> >
> >
> > ----- Original Message -----
> > From: "armando guerra" <birdie@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, May 18, 2004 12:58 PM
> > Subject: [TechAssist] Need Some input on becoming a RCA ASC.
> >
> >
> > > I have been asked by a dealer here if I would like to become an rca
> > > service center.I never liked the idea of being a asc for any company
> > > because of all the requirements that they have.This dealer handles
only
> > > rca tv's.I would like to get some info on whether you techs think its
> > > worth becoming a service center. How good are the pay scales.Do they
pay
> > > mileage for out of town calls?The dealer say's that he sells alot of
the
> > > projo tv's.I would apreciate any and all the info that I can get so
that
> > > I can make a decision whether I want to be an asc for rca.If I decide
> > > that I want to do this,does rca have a website that I can download all
> > > the info on becoming an asc?
> > > Thanks for all your help in this matter.
> > > Mando
> > > Birdie's TV & Electronics
> > > Casa Grande, AZ
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> > ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
