NEC DT-4861S Projection TV goes into shutdown. Hi fellow techs, Working on this projection TV. After much head scratching and testing, have discovered that this set is going into shutdown because of excessive HV. Measured HV first coming out of flyback, but set shut down too quickly to measure. Then days later (today, to be exact) measured HV coming out of HV block or splitter and found it to be 35 KV, before it went into shutdown. HV should be 31 KV from service manual. Is it possible for HV block to produce more voltage than going in? Or is my flyback producing the excessive HV? B+ is good. Is there any method to test the HV splitter out of circuit? Thankyou. Kevin Wilks Kevin's TV and Video Repair Penticton BC Canada kevinstv@xxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/