thanks. was working with no schematic on this one. marcello ----- Original Message ----- From: <BOSS1996@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, January 25, 2002 7:28 PM Subject: [TechAssist] Re: Mitsubishi,CS20SX!,q505 no need? > In a message dated 1/25/2002 6:04:46 PM Eastern Standard Time, > kahuna.tvsrc@xxxxxxxxxxx writes: > > > > > > hello techs, > > > > this set came in with shutdown problem.traced the problem to > > Q505 draining the regulated 9v, > > off the 29 vdc,secondary voltage, > > next to the vertical IC > > > > i unsoldered this transistors' > > emitter ,turned the set on,then > > check linearity vertical size,seems > > to be ok. > > > > the set seems to be normal in every way. > > > > what is q505 purpose in life,except to take space? > > > > if you have answers please post it, > > thank you. > > > > marcello > > > > It is a shutdown transistor, you probably have leaking caps nearby which have > caused the transistor to get leaky. > Bob > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.