Make : Mitsubishi Model : VS50501 Chassis : VZ4 Problem : OSD is OK but not passing video thru IC200 CXA2095S. Perfect Y signal on Pin 4 & perfect chroma on pin 5. Pins 20/22/24 all have perfect blanking pulse. Data lines are perfect. Is there a training document on this circuit from Mitsubishi or Sony ( It is a Sony chip!) Or can someone shed some insight on why the signal will not pass thru this chip? Only odd voltage is the IK pin 25. Schematic shows 4.1 VDC...we have 7VDC. If we lift the pin...it floats at 3. Chip has been changed! Any thoughts?! Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/