Check the caps in that circuit before condemning the flyback. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx ----- Original Message ----- From: "Tony S" <tcselectronics@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 08, 2005 9:50 AM Subject: [TechAssist] Mitsubishi VS50501A VZ4 chassis- shutdown w/britness Hi guys, went on a call for a mits that's in shutdown, found the set will remain on if in an unused video input or if the pix is a dark scene. traced the shutdown to the x-ray protect ckt. IC5A01 is triggering from pin 1, found tracing back to the flyback pin 8 at low bright or no video pin remains at 6.5 volts, pressing the menu changes this voltage to 2.5 volts and causes shutdown. I have checked All the common tips D5A22, D5A09, D5A21 and all the transistors around the HV monitoring ckt. Wondering if anyone had a bad flyback cause this symptom as I believe the flyback is bad. thanks Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ---------------------------------------------------------------------------- - This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/