[TechAssist] Re: Mitsubishi TV. Model#CS2724C. Distortion in Picture.

  • From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 9 Jan 2003 13:08:39 -0500

Try replacing C4E5....100/50volts.

-Ed-
----- Original Message -----
From: "D Panday" <dpanday@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, January 09, 2003 12:08 PM
Subject: [TechAssist] Re: Mitsubishi TV. Model#CS2724C. Distortion in
Picture.


>
> Peggs,
>
> Thanks for the info., However, I by pass the PIP. Same
> polem.
> I will have to get a schematic..
> It is a Canadian Model to anwser Leonard's post.
> Thanks again.
> Panday
>
>
>
>
>
>
> >From: peggs <peggs@xxxxxxxxxxxxxx>
> >Reply-To: techassist@xxxxxxxxxxxxx
> >To: techassist@xxxxxxxxxxxxx, techassist@xxxxxxxxxxxxx
> >Subject: [TechAssist] Re: Mitsubishi TV. Model#CS2724C. Distortion  in
> >Picture.
> >Date: Wed, 08 Jan 2003 13:42:50 -0600
> >
> >
> >Don't know if it's the 'typical' Mitsu. PIP Module,but
> >if it has those little SM caps,heat and chill for a reaction.
> >The typical PIP module can be bypassed by removing it,and
> >using capacitors to jumper connector VP pins 5&11 and 7&9.
> >Use 2.2/50v.
> >Otherwise,look for Black capacitors with one lead 'blackened'.
> >You can heat and chill these as well for a reaction to the symptom.
> >If it has these caps,good luck,cause it probably has a jillion of 'em
> >
> >Peggs
> >
> >At 01:51 PM 1/8/03 -0500, D Panday wrote:
> > >
> > >Yes. There is a PIP module.
> > >Panday
> > >
> > >
> > >
> > >
> > >
> > >
> > >>From: peggs <peggs@xxxxxxxxxxxxxx>
> > >>Reply-To: techassist@xxxxxxxxxxxxx
> > >>To: techassist@xxxxxxxxxxxxx, techassist@xxxxxxxxxxxxx
> > >>Subject: [TechAssist] Re: Mitsubishi TV. Model#CS2724C. Distortion in
> > >>Picture.
> > >>Date: Wed, 08 Jan 2003 11:17:46 -0600
> > >>
> > >>
> > >>It's a Mitsubishi,so if it has a PIP module........
> > >>
> > >>Peggs
> > >>
> > >>At 11:04 AM 1/8/03 -0500, D Panday wrote:
> > >> >
> > >> >Hi All,
> > >> >
> > >> >I have a Mitsubishi TV with Distortion on
> > >> >Picture.The distortion is on high contrast area - White smearing.
> > >> >If I input an Center Cross pattern, the distortion is on the
> > >> >center line (top to bottom). Not noticeable on color bar.
> > >> >
> > >> >I scope the cathode. Look like the rising time is too slow.
> > >> >If I reduce the screen voltage, pix ok but it is too dark.
> > >> >
> > >> >Any help will be appreciated.
> > >> >TIA.
> > >> >Panday
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >_________________________________________________________________
> > >> >MSN 8 with e-mail virus protection service: 2 months FREE*
> > >> >http://join.msn.com/?page=features/virus
> > >> >
> > >> >------------------------------------------
> > >> >Submit A Repair Tip For Everyone Here:
> > >> >http://www.tech-assist.org/secure/tip/main.html
> > >> >------------------------------------------
> > >> >To REMOVE your email address, click here:
> > >> >  http://www.tech-assist.org/unsubb.html
> > >> >To CHANGE your email address, click here:
> > >> >  http://www.techassist.net/forms/change.html
> > >> >
> > >> >
> > >>Peggs' Electronics
> > >>1519 West 2nd Street
> > >>Owensboro,KY 42301
> > >>270-926-4968
> > >>fax 270-686-7399
> > >>------------------------------------------
> > >>Submit A Repair Tip For Everyone Here:
> > >>http://www.tech-assist.org/secure/tip/main.html
> > >>------------------------------------------
> > >>To REMOVE your email address, click here:
> > >>   http://www.tech-assist.org/unsubb.html
> > >>To CHANGE your email address, click here:
> > >>   http://www.techassist.net/forms/change.html
> > >
> > >
> > >_________________________________________________________________
> > >MSN 8: advanced junk mail protection and 2 months FREE*.
> > >http://join.msn.com/?page=features/junkmail
> > >
> > >------------------------------------------
> > >Submit A Repair Tip For Everyone Here:
> > >http://www.tech-assist.org/secure/tip/main.html
> > >------------------------------------------
> > >To REMOVE your email address, click here:
> > >  http://www.tech-assist.org/unsubb.html
> > >To CHANGE your email address, click here:
> > >  http://www.techassist.net/forms/change.html
> > >
> > >
> >Peggs' Electronics
> >1519 West 2nd Street
> >Owensboro,KY 42301
> >270-926-4968
> >fax 270-686-7399
> >------------------------------------------
> >Submit A Repair Tip For Everyone Here:
> >http://www.tech-assist.org/secure/tip/main.html
> >------------------------------------------
> >To REMOVE your email address, click here:
> >   http://www.tech-assist.org/unsubb.html
> >To CHANGE your email address, click here:
> >   http://www.techassist.net/forms/change.html
>
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
>

------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html

Other related posts: