[TechAssist] Re: Mitsubishi Standby Power Transformer
- From: Al Gutz <alg@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 16 Feb 2005 23:31:15 -0500
Open up the plastic covering on transformer and find old fuse link,
install a new trermo fuse placing it in contact with the windings and
close back up. Use a 103 deg C ei NTE8103
Al G
AURTRON wrote:
> Need standby power transformer for Mit. Model CK2630R.SAMS # 2771-1. Part #
> 350P439020 Transformer is mounted in cabinet separate from chassis both
> primary and secondary plug into mother board. Input = 120VAC Secondary 18VAC
> Source for +20 VDC standby voltage. Internal fuse is open and for safety
> liability would like to replace. Part NLA Tritronics. Either new or used
> would suffice. Please reply to email listed below with price if you have
> available.
> TIA
>
> Don
> Aurora Electronics
> Florida
> Aurtron@xxxxxxxxxx
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
