C965 in Regulator circuit..2.2ufd@xxxxxxxxxxxx similar. Capacitor designation may differ..but look for low ufd. value..high voltage. May be an idea to change quite a few caps in the regulator circuit. -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of matt sherer Sent: Friday, November 28, 2003 10:52 PM To: techassist Subject: [TechAssist] Mitsubishi PTV, M#:VS6017R Mitsubishi PTV Model VS6017R Problem: Unit will not power up, ead. Customer said that several months ago they had to hit the power button a couple of times to get the unit to come on. As time went on it got worse till it would not come on at all. I've worked on several of these units before and always found bad solder joints on the main PWB. Found several bad joints but did not help. Anyone have a print for the PS of this unit? Also, the board on the front of the TV needs to be replaced. Customer broke the power button off and it is unrepairable. TIA! Gear Guy Electronic repair A/V systems design, maintenance and installation AMX programming Matt Sherer, CET 1411 Honeysuckle Lane Champaign, IL 61821 (217)356-9479 m.sheer@xxxxxxxxxxxxx ************************************************************************ ***** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/