Have you got Horizontal drive? "Hear the yoke? Do you mean you hear the vertical scanning. Check connections on the Horiz drive transformer. -Ed- . Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ----- Original Message ----- From: "John Florea" <Watcher-@xxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 04, 2003 6:28 PM Subject: [TechAssist] Mitsubishi CS-40503 > Sound but no picture. I hear the yoke, but no lights from filaments and no high voltage. No print for this unit, any tips for this unit out there? This is a 40" tube set. I can hear channels change, but no menu or raster. TIA, John. > > > John Florea Jr. > Affordable Electronics > Tumwater Washington. > > **************************************************************************** * > Submit A Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > **************************************************************************** * > For automatic password retrieval 24 hours a day, go to: > http://www.tech-assist.org and select "Lost your Login Info?". > **************************************************************************** * > ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************