I posted the audio fix (feedback squeel, caps leaking).Next morning, turned on, had HV,sound,black screen. Seemed G2 screen was low, tho hard to check properly.(hi impedence). After a while, I unsoldered the G2 wire from flyback to CRT board, measured wire.G2 voltage was there.Resoldered to CRT board, one sharp rap on CRT neck,picture restored. CRT was loading screen G2 down,probably a bit of contaminant in the tube's neck.Has been OK since. Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/