Well I used to have this problem before and I don't remember exactly what kind of chassis it was and the problem was bad caps on the 5-9 and 12 volts regulators ill send you some tips it guide you a bit good luck:Manuel --- Tim Poole <tdp13158@xxxxxxxxxxx> wrote: > This one had no power so I replaced flyback and bad > focus/screen control. Set now comes on with tear in > horizontal on all tubes. I have replaced the > convergence STK393-110 twice but no change. If the > VU plug ( convergence yokes) is unpluged, tear is > gone but no correction obviously. I have checked > most voltages only questionable ones are on pin 27 & > 28 of STK393-110 which are -.1 instead of +.3 > Anyone seen this? Any help would be appreciated, > thanks, Tim > Tim Poole dba > A-Mobile TV Shop & Precision TV Svc. > Fredericktown Ohio, 43019 > > tdp13158@xxxxxxxxxxx > pooletim@xxxxxxxxxxx > > 419-756-3443 > FAX 740-694-1032 > ----------------------------------------------------------------------------- > This Email List is accessible to the general public > through search engines. Remove: > http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and > select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > Manuel Orion TV Repair (323)807-9876 Los Angeles CA 90001 ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/