Al; Think of an intermittent open...like a bad solder connection. Especially on those STK bias resistors. -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx teltek@xxxxxxxxx On 2-Dec-04, at 11:14 PM, Al Gutz wrote: > Dan Thanks for the info. Now have to find why it cooks. Odds are > since > R8830 is on the out-put of the STK and I have intermit short on -24V > supply that goes directly to STK we have a bad IC. > > When solved I will post details and fix > > Al G > > danny williams wrote: >> R8830 (1.2 ohm 2 watt) R8828 (270 ohm 1 watt) HTH >> >> DanW >> >> >> >> ----- Original Message ----- >> From: "Al Gutz" <alg@xxxxxxxxxxx> >> To: "tech assist" <techassist@xxxxxxxxxxxxx> >> Sent: Tuesday, November 30, 2004 9:58 PM >> Subject: [TechAssist] Mits VS4507 Chassis QV11b Part ID >> >> >> >>> Could someone identify the value or resistor in this set >>> >>> Board # R8830 >>> >>> Location: IC8800 pin 13 goes to R8828 then to R8830 >>> >>> Thanks for any leads. >>> >>> Al G >>> Al's TV-Electronics >>> Pembroke Ont. >>> Canada >>> >>> >>> --------------------------------------------------------------------- >>> -------- >>> Lost Password: >>> http://www.tech-assist.org and select "Login Problems?". >>> Email Archives: >>> //www.freelists.org/archives/techassist/ >>> >> >> >> >> >> ---------------------------------------------------------------------- >> ------- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> > > > ----------------------------------------------------------------------- > ------ > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/