[TechAssist] Re: Magnavox 27c9-06 RH5060 ch03 part #s needed

  • From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 6 Aug 2002 14:38:58 -0500

Philips PartsSeeker program, you can also look up parts by model but not on
the older models. Strange that the Philips web site, ThePartsStore.com will
not cross the old numbers to the new.
Jim Myers
Telrad Electronic Services Co.
Fort Wayne, IN 46815
jr.myers@xxxxxxxxxxx
260-432-4486 Fax and Voice
Fax is always on
----- Original Message -----
From: "Larry E." <videotech@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, August 06, 2002 2:37 PM
Subject: [TechAssist] Re: Magnavox 27c9-06 RH5060 ch03 part #s needed



Jim, where did you find the cross from Nap 10 digit numbers to the newer
12 digit numbers???
Larry Eastman
American TV & Electronics
Crystal River, FL.

Jim Myers wrote:

>Then I should feel young?
>Q2 is 483513047063
>Z2 is 483513037203 or BZX79B1 or NTE5019T1, 10 volt 1/2 watt 1%
>Jim Myers
>Telrad Electronic Services Co.
>Fort Wayne, IN 46815
>jr.myers@xxxxxxxxxxx
>260-432-4486 Fax and Voice
>Fax is always on
>----- Original Message -----
>From: "Larry E." <videotech@xxxxxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Tuesday, August 06, 2002 2:22 PM
>Subject: [TechAssist] Re: Magnavox 27c9-06 RH5060 ch03 part #s needed
>
>
>
>Phil, I hope you know this is showing everyone how old I am, but heres
>your part numbers,
>Q2, Fet 6105630001      Z2, 10 volt zener  2%  5303291100  I don`t have
>any idea how your
>going to cross them to the newer 12 digit part numbers unless Philips
>can do it for you. Good luck
>on that old beater.
>
>Larry Eastman
>American TV & Electronics
>Crystal River, FL.
>
>Phillip R. Hull wrote:
>
>>This unit has a little standby power board that most of all the other C9
>>chassis's do not have and I don't have the microflitch for this model.  I
>>have 87-008 rev 1  but I need rev 2 I believe.   I need the parts numbers
>>for Q2 a FET   and Z2 a zener diode on the power standby board.    I hope
>>someone can help
>>Thanks
>>Phillip R Hull
>>phil245@xxxxxxxxxxxxx
>>
>>------------------------------------------
>>To REMOVE your email address, click here:
>> http://www.tech-assist.org/unsubb.html
>>To CHANGE your email address, click here:
>> http://www.tech-assist.org/change.html
>>------------------------------------------
>>***NEW*** Tips Added Instantly!!!***
>>Submit Repair Tips here:
>>http://www.tech-assist.org/secure/tip/
>>
>>
>
>
>------------------------------------------
>To REMOVE your email address, click here:
>  http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
>  http://www.tech-assist.org/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
>------------------------------------------
>To REMOVE your email address, click here:
>  http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
>  http://www.tech-assist.org/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
>


------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/

------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: