In Philips Force 32 service , Your Model no.came up CRN090C0MB1 if they are similar models, check for open L201 .. Voltage at q201 col. 116v, q202 col.124v, q203 col.128v... emitters are about 6.5v., and bases about 6.9v... Generic # on all three xistors is 2SC2228 (D,E,) Voltage starts at L1 FBT pin 3, thru D3, to pin 1 of LD2 on crt Brd. to L201 thru R214,R218,R222, (all 3 resistors 15K ohm,1W.) each going to collectors Q201,202,203... L201, micro Inductor 220uH, p/n. 4835 157 57537.. Hope this helps.. Bill Bill'sTV Sonora,Calif. HSWAD@xxxxxxx wrote: Could use the service info for Magnavox CRN090AE01. This unit had bright screen with retrace lines but also has video showing through. Kine voltage values would help if full service infor is not available. TIA Hollis Bates, EE-retired, Lewiston, Maine, _HSWAD@xxxxxxxx (mailto:HSWAD@xxxxxxx) , 207 784 8689 ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Carol Rundle brundle@xxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/