[TechAssist] Re: KV-7168a,Toshiba
- From: "Tiberius Kraemer" <ty1k@xxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 29 Jan 2002 07:54:31 -0800
Marcello
Had an interesting one a few months back which could apply to part of your
problem.
When the tape ran out, the unit would shut down with alarm coming on.
Instead of going into rewind, the tape just tightened up on the head and
stopped it, causing the error and setting off the alarm. The strange thing
was that the "beginning of tape" sensor worked ok. Replaced the "tape end"
sensor did not cure the problem. Turned out to be the center post LED just
at threshold of failure.
As to loosing the memory.... Old Timers Disease ??!!
Good Hunting!
Ty
Tiberius (Ty) Kraemer
Blue Star Electronics
3312 Silverton Rd. NE
Salem, OR 97303-2753
Phone: 503 391 1491
ty1k@xxxxxxxxx
----- Original Message -----
From: "res0nvn4" <kahuna.tvsrc@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, January 28, 2002 1:39 PM
Subject: [TechAssist] KV-7168a,Toshiba
>
> Hello Techs,
>
> this set,time lapse recorder,dont'
> keep set-up commands into memory,it accepts it on display.
>
> memory battery rated at 3.6vdc
> reads 4.4vdc,so it looks ok.
>
> also when it reaches end of tape,
> alarm beeps come on and stays
> on till reset button at the back of unit is pressed.
>
> a similar model do not do the same.
>
> any one came across this problem?
>
> Thanks,
> Marcello
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
