Sounds like one of the other buttons are stuck and/or leaky causing the keypad matrix to respond intermittently. Are there any spills near the buttons? Just a thought. David Lessard Alexandria Electronics Ontario, Canada Mr_fixit@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Shupe Sent: Thursday, March 25, 2004 9:07 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] JVC Model AV-35790 Hi Everyone... I have this JVC that intermittantly develops what appears to be a system control fault. All control functions operate at a fraction of their normal speed ...that is, vol up/down, chan up/down, power, etc have to be held for a long time before action is taken by the set. This is true for both the front panel buttons and the remote keys. My outside tech reports that sometimes channel select changes the OSD but not the channel itself (I have not seen this). Has anyone run into this before? P.S. I changed the processor ceramic resonator with no success. TIA, Jim Shupe, CET Lloyds's TV Yucca Valley, CA ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/