I found the info on a XV-M565BK. Thanks. Two screws in the front holes. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: "tech assist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 15, 2005 7:45 PM Subject: [TechAssist] JVC DVD XV-M555BK Need info. >I need to know if there are 4 screws holding the laser assembly on the > carriage. Does anyone have a exploded view or any info on this. This one > only has 2 and I'm not sure if it is missing 2 or not. When I got it the > disc was catching the spindle because the deck wasn't lowering. The screws > were in the back. So I put one in the front and one in the back and it > doesn't catch now but still not quite right. Four screws would do it but I > need the # for the screws as they are special. I will try putting 2 in > front > but I still need the part # just in case. Thanks. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/