I have been working on a Sony ModelKV35S42 for over a month. Basically what happens is when you turn unit on it comes up for several seconds then you hear a loud snap. Then you find the Q502 H.output shorted, either damper diode D502 or D503 shorted, power supply IC 601 shorted and R607 open. I then replaced T503 flyback, Q502, IC601, D502, D503, D504, C511 & C513. After replacing these parts I checked the flybacks pulse width & load with my Sencore and it was perfect. I then fired it up again and it snapped and shorted all the same parts again. I talked to Sony about it and they suggested I replace the shorted parts and slowly bring up the line voltage while monitoring the flyback pulse, B+ & HV. everything looks perfect until the B+ gets to about 110V, then the trailing edge of the pulse starts to distort where it contacts the base line and the HV starts going down a bit while the H.Output starts getting hot. I did change the T501 H Driver transformer, Q501 H. Driver & C502 in Q501's base circuit. I still have the same problems with the pulse distorting & the H.Output getting hot. I have checked every part in the H.output stage, H.Driver stage & Pincushion stage. I was wondering if anyone possibly has a chassis AA-2D out of one of the following models, KV-32S42, KV-32S66, KV-32V42, KV-35S42, KV-35S66 or KV-35V42. The number on the original flyback is 8-598-809-00 which should help to identify the right chassis version. TIA, Dale --=20 Dale A. Lubow CET Harris TV & Appliance 335 Lincoln Way Ames, IA 50010 515-232-1109 (Voice) 515-232-3356 (Fax) HarrisTV@xxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/